Heat Pump
What is heat pump?
A heat pump is a system that efficiently uses renewable energy to heat water without using the electricity. The hot water heat pump is like a reverse refrigerator that uses the air outside the unit to heat the water stored inside the unit using a heat exchange system. These systems are energy efficient and can save you good amount of money to help you achieve your saving goals.How does it work?
A Simple Four-Step-Cycle:
Extracts heat from the air outside |
Converts the air to gas |
Water Heating |
End Result |
A fan extracts heat energy from the air outside the unit, across the evaporator |
The evaporator then converts the liquid refrigerant into hot gas |
The hot gas produced helps to heat the water inside the unit using the condenser coil |
Hot water is produced, and you end up saving up to 80% on your energy consumption attributed to your hot water usage |
Where can you place Heat Pump Water Heaters?
Heat Pump Water Heaters required plenty of fresh air from outside and it advisable to install them in the areas located outside your house. However, some models can also be placed in the garage while some heat pumps can extract air from the ceiling spaces.
How much does it cost?
When purchased from the market, heat pump hot water systems can range in price up to $5000 fully installed. However, we are offering a free* installation of the hot water systems along with handsome warranty.
Why is it free?
A combination of three Government scheme does the magic! It takes two Victorian State Government’s initiatives and one Federal Government initiative to make you eligible for a free installation!
- VEU Scheme (Victorian Energy Efficiency Certificate)
- STC Scheme (Small Scale Technology Certificates)
- SHP Scheme (Solar Home Program)
You can check your eligibility here:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For more information please visit: https://www.energy.gov.au/rebates/solar-and-heat-pump-hot-water-system-rebate
Brand:
Eco-Alliance Split System Heat Pump System
Refrigerant Type |
R410a |
Mass Volume |
900 grams |
Running ambient air temperature |
-7◦ C/ +40◦ C |
Setting Outlet water temp |
35~60°C (1°C step) *1 |
Product weight |
30kg |
Thermal capacity |
3.6kw *2 |
Average input power |
0.85kw *2 |
COP |
4.23 *2 |
Max power input |
1.25kw |
Circuit Breaker Size |
5.43 |
Design Pressure (High/Low) |
4.4/0.6MPa |
Protection Raining Class |
IPX4 |
Rated Pressure |
500kPa |
Mldel No. |
ECO- 155 LE |
ECO-260 LE |
A (Height) |
1700 |
1760 |
B (Hot Water) |
1455 |
1430 |
C (Cold Water Inlet) |
255 |
230 |
D (Diameter) |
Փ470 |
Փ560 |
E (Heat Pump Flow) |
255 |
230 |
F (Heat Pump Return) |
555 |
530 |
G (Sensor Port) |
800 |
800 |
H (PTR Valve) |
1455 |
1430 |
Disclaimer: Auspro Group aggregates rebates under Eco Light up and/or EVEEC accreditation.